Sunday In Suburbia: The {New} Dining Room Chandy

So, I'm about half done with 5 other projects...I really need to focus in on something, but it's juggling 10 minutes of free time here and there, so it's hard to make real progress.

I knew updating the dining room chandelier would be at the top of the list before we even bought the house.  It was just not my taste.  I like oil-rubbed bronze in some places, but it was not going to work with my formal dining room concept.  Of course buying new would be the easy solution, but I have other more important things to spend $250 on.  Enter spray paint project 1 of 423.

A few coats of white glossy spray paint along with removing the horrid mauve toned glass shades made quite the difference.  Long term I would love Edison lamps in this fixutre, but the ones I want are $9 each.  $9x5=$45, and I'm not spending that just on 5 light bulbs right now.  Plus, the candelabra lamps are growing on me.

Here is the dining room before we moved in:

Dining Room Before

Dining Room Before: View From Stairs

We are not done, but it may be a while before I spend the money on a buffet and new upholstered chairs.  But here's the "progress".  It's funny to me that I was the most unsure about the paint color here, and everyone that has come to my house has loved this color.  I'm really happy with it, too!  It's about 80% Sherwin Williams "Interesting Aqua" and 20% Martha Stewart "Flagstone" reduced to 50% intensity.  I am still contemplating painting the oak banister and railing to white.  I know the look would be right, but paint does not typically hold up as well as stain, and the railing gets all the abuse!  If you can notice - I painted the wall mounted railing half way up the stairs.  Like about 5 other things around the house, I'm going to live with it a little while and see what I think before proceeding.

Dining Room Progress

Dining Room Progress: View From Stairs

Faithful Fridays: Let Us Learn from Josiah

Our nation is long overdue for a Josiah-like moment.

If you are not a Christian, and don't care to read anything about the subject feel free to disregard this post as my frustration is not towards you.  For those who are "carnal Christians" and those who profess to be a Christian, but do not actual possess faith, then you will not like this post.  More on that here: Four Kinds of People  

Okay.  So for the few people who are left to read this...

Sunday in Suburbia: Transforming a Mirror for Under 20 Bucks

Last week I shared the hall bath nearly complete.  It was just missing the mirror frame as I had the need to revise the design...again.  But this project is now DONE.  Now onto the 1853 more!

Transforming a Mirror for Under $20

To recreate this frame and shelf you can use MDF or wood.  I used wood, mainly because after three different visits to Home Depot and each time the line for wood cutting was forever long.  I've mastered the miter saw, but I'm still a little afraid of my circular saw, and unfortunately I do not have a big table saw for making long rips.  However, I would recommend MDF unless you want to do a stained look rather than the painted I have done here.  If you go with wood, be sure to use flat, un-warped boards.  The quick way is to place the boards on the floor at the store and see if they lay flat or turn up.

I used three 1x4 boards of white oak that were about $3.50 each per 8'-0" long board from Home Depot.  For the center panel I used a precut 18"x36" white oak paint grade board that was about $7 from Lowes {again, didn't want to wait in line for a cut}.  I took the overall height measurements from the top of the backsplash to the top of the mirror, and then the width measurement of wall to wall and mirror edge to mirror edge.  I went 2" taller than the existing mirror in order to attach it to the studs in the wall above.  I used my work program, AutoCAD, to draw it up, but you can sketch it.  I'm just a sucker for precision...but that fell to the wayside half way through.  After cutting each piece I labeled them as they were all very similar in size and difficult to tell apart without measuring.  While I wanted to miter each corner, the ceiling on the left side slants inward, and creates a 45 degree angle at the top corner of the mirror.

Label Boards

If you miter each corner then you can use long screws to join the two pieces of wood discretely rather than using a bracket.  The brackets caused a little headache floating against the mirror, so try to avoid them if they will be up against the mirror like mine.  On the tops where I did not do a miter cut I used Liquid Nails and held it together with small clamps while it bonded.

Liquid Nails and Clamps

For the center shelf, I cut two shelves and equally spaced them on the back panel being sure the lowest shelf was high enough for my towel stand to sit below.

If you have ever had a crooked screw, or trouble aligning the pilot holes you
accurately measured then you probably are not holding your drill level.

After installing the frame as I installed the shelf, I caulked at the countersunk screws, wood seams, and where the wood meets the mirror.  This helped create a much more "finished" look.  You can also install the whole unit as one piece using a cleat which eliminates the exposed screws.  Most of the mirrors and headboards installed at the hotels I design are installed using cleats.  You can use metal french cleat or create a wood one yourself if your semi-handy.  I went the easy and cheap route for this bathroom.

Supply List:

• Wood or MDF for frame, shelves, and back panel (panel shown is 18"x36")
• 2" and 3" wood screws
• Liquid Nails
• Spring Clamps or Angle Clamp
• Caulk
• Paint or Stain
• Level
• Miter Saw (If you're doing the cuts yourself)
• Power Drill 
• Brackets if necessary 
• Metal French Cleat if desired

Link Parties to Check Out:

  

Sunday in Suburbia: The Hall Bath Refresh

Hmm...I may still not have a complete hall bathroom.  And I suppose it's Monday, and not Sunday.  Opps.

It is so close, but we have done a few other things this weekend like drive to Knoxville to pick up our huge new grill from my in-laws.  This thing is massive, and unfortunately it is ORANGE with a huge white T.  We assembled it Sunday - hope to use it this week - and it seems pretty ah-mazing. {Other than the Tennessee Vol part).  But I feel like I'm stringing you along, so I'll go ahead and post the nearly complete bathroom :)

The Almost Complete Hall Bath

Feel free to review the before and the progress updates: Hall Bath Reno Progress but for a quick look at the before here you go: